Integration · Field service

Connect Claude & ChatGPT to NoiseAware

Ask your AI which of your rentals had a noise alert last night, who is staying there, or to lower the quiet-hours threshold in the living room. It reads your NoiseAware properties, sensor zones, noise events, alerts and noise readings, and your reservations and guest messages. It can change threshold schedules, add or remove reservations, add property notes and send a message to a guest.

Connect NoiseAware free

Free plan, no credit card. Takes about a minute.

Try asking

“Were there any noise alerts in the last two hours?”
The AI lists recent noise alerts from that window with property and zone.
“What happened at Beach House on Saturday night, and who was staying?”
It lists noise events for the property, reads the noise readings around the event, and finds the reservation active at that time.
“Set the living room threshold at Beach House lower from 22:00 to 08:00.”
It reads the current threshold schedule for the zone and sets a new schedule with the time window and level you give. This changes when alerts fire.

What your AI can do

Noise events and alerts

List noise events and recent alerts, and read noise-level readings over time for a property or around a single event.

Properties and sensors

List properties and sensor zones with status and battery, read and set noise threshold schedules, and keep notes on properties.

Reservations and guests

List, add and delete reservations, read guest messages, send a message to a guest and mark messages as read.

“Send the current guest at Beach House a friendly reminder about quiet hours.”
It finds the active reservation and sends your message to the guest, who receives it right away.
“Do I have unread guest messages?”
It lists guest messages that have not been read yet and can mark them as read when you are done.
“Which sensors have low battery?”
It lists the sensor zones at your properties with their status and battery level.

162 tools for NoiseAware

These tools are switched on when you connect. You can switch any of them off, or require your approval before it runs.

create_alertChanges dataCreate a new alert. API summary: testAlert MiscSighV1.
create_bundleChanges dataCreate a new bundle. API summary: create BillingBundles.
create_collectorChanges dataCreate a new collector. API summary: collectorActivation PropertiesSighV1.
create_companyChanges dataCreate a new company. Required: org id or stripe id. API summary: createExisting BillingOrganization.
create_company_billing_organization_create_newChanges dataCreate a new company. Required: organization or user. API summary: createNew BillingOrganization.
create_company_organization_sigh_v1_create_new_organizationChanges dataCreate a new company. API summary: createNewOrganization OrganizationSighV1.
create_csvChanges dataCreate a new csv. API summary: listCsv Device.
create_csv_events_list_csvChanges dataCreate a new csv. API summary: listCsv Events.
create_csv_orgs_list_csvChanges dataCreate a new csv. API summary: listCsv Orgs.
create_csv_properties_list_csvChanges dataCreate a new csv. API summary: listCsv Properties.
create_csv_user_list_csvChanges dataCreate a new csv. API summary: listCsv User.
create_data_pointChanges dataCreate a new data point. API summary: dataPoints Monitoring.
create_filter_valueChanges dataCreate a new value for a filter. API summary: listFilterValues Events.
create_filter_value_properties_list_filter_valuesChanges dataCreate a new value for a filter. API summary: listFilterValues Properties.
create_icallinkChanges dataCreate a new icallink. API summary: createIcall ReservationsSighV1.
create_integrationChanges dataCreate a new integration. API summary: createIntegrationsForPermittedUser IntegrationSighV1.
create_integration_propertyChanges dataCreate a new property for a integration. Required: items. Search properties first to avoid duplicates. API summary: createPaginatedProperties IntegrationSighV1.
create_orderChanges dataCreate a new order. Required: order or payment source id. API summary: create orders.
create_orgChanges dataCreate a new org. API summary: create Orgs.
create_org_userVisible to othersCreate a new user for a org. Has effects visible outside this system. API summary: inviteUser Orgs.
create_partnerChanges dataCreate a new partner. API summary: create Partner.
create_paymentChanges dataCreate a new payment. Required: order or payment source id. API summary: createPayment BillingPayments.
create_propertyChanges dataCreate a new property. Search properties first to avoid duplicates. API summary: create Properties.
create_property_noteChanges dataAdd a note to a property: `property_key` and `text`.
create_property_properties_sigh_v1_create_propertiesChanges dataCreate a new property. Search properties first to avoid duplicates. API summary: createProperties PropertiesSighV1.
create_property_zoneChanges dataCreate a new zone for a property. Search zones first to avoid duplicates. API summary: createAZsForProperty AZSighV1.
create_refreshChanges dataCreate a new refresh. Required: refresh token. API summary: refresh Authentication.
create_reservationChanges dataAdd a reservation to a property: `property_key`, `start`, `end`, `type` (Booked, Vacant, Hold, Owner), guest name/email/phone and `expected_guest_count`.
create_resetDeletesCreate a new reset. Destructive action; may require approval. API summary: sendUniqueResetKey UsersSighV1.
create_sensorChanges dataCreate a new sensor. API summary: sensorActivation PropertiesSighV1.
create_shipstationChanges dataCreate a new shipstation. API summary: updateOrders Shipstation.
create_tncChanges dataCreate a new tnc. API summary: recordUserTerms UsersSighV1.
create_userChanges dataCreate a new user. API summary: list ActivityZones.
create_user_activity_zones_list_signal_strengthChanges dataCreate a new user. API summary: listSignalStrength ActivityZones.
create_user_events_list_by_propertyChanges dataCreate a new user. API summary: listByProperty Events.
create_user_firebaseChanges dataCreate a new firebase for a user. API summary: registerUserDevice UsersSighV1.
create_user_partner_list_org_partnersChanges dataCreate a new user. API summary: listOrgPartners Partner.
create_user_properties_listChanges dataCreate a new user. API summary: list Properties.
create_user_user_notification_settings_list_property_notificatioChanges dataCreate a new user. API summary: listPropertyNotificationSettings userNotificationSettings.
create_user_users_sigh_v1_create_userChanges dataCreate a new user. API summary: createUser UsersSighV1.
create_user_users_sigh_v1_invite_userVisible to othersCreate a new user. Has effects visible outside this system. API summary: inviteUser UsersSighV1.
create_user_users_sigh_v1_set_properties_list_for_userDeletesCreate a new user. Required: items. Destructive action; may require approval. API summary: setPropertiesListForUser UsersSighV1.
create_webhookDeletesCreate a new webhook. Required: url, notify group disco, notify group noise or organization id. Destructive action; may require approval. API summary: createWebhook Orgs.
delete_activityzoneDeletesPermanently delete a activityzone by activityzone id. Destructive action; may require approval. API summary: delete ActivityZones.
delete_bundleDeletesPermanently delete a bundle by bundle id. Destructive action; may require approval. API summary: delete BillingBundles.
delete_icallinksMoves moneyPermanently delete a icallink. Financial or irreversible action; may require approval. API summary: deletePropertyICallLink ReservationsSighV1.
delete_integrationDeletesPermanently delete a integration by name. Destructive action; may require approval. API summary: deleteIntegration IntegrationSighV1.
delete_messageDeletesPermanently delete a message by email. Destructive action; may require approval. API summary: deleteUserEmail userNotificationSettings.
delete_orgDeletesPermanently delete a org by org id. Destructive action; may require approval. API summary: delete Orgs.
delete_org_usersMoves moneyPermanently delete a user by org id. Financial or irreversible action; may require approval. API summary: removeOrgUsers Orgs.
delete_propertyDeletesPermanently delete a property by property id. Destructive action; may require approval. API summary: delete Properties.
delete_property_properties_sigh_v1_delete_propertyDeletesPermanently delete a property by property key. Destructive action; may require approval. API summary: deleteProperty PropertiesSighV1.
delete_property_user_notification_settings_delete_property_notifDeletesPermanently delete a property by prop id. Destructive action; may require approval. API summary: deletePropertyNotificationsSettings userNotificationSettings.
delete_property_wifisMoves moneyPermanently delete a wifi by property key. Financial or irreversible action; may require approval. API summary: deleteWifiCredentials PropertiesSighV1.
delete_property_zoneDeletesPermanently delete a zone by zone key. Destructive action; may require approval. API summary: deleteAZ AZSighV1.
delete_reservationDeletesPermanently delete a reservation by its ID (`message_id`). This cannot be undone.
delete_revokesMoves moneyPermanently delete a revoke. Financial or irreversible action; may require approval. API summary: revokePartner Partner.
delete_userDeletesPermanently delete a user by user id. Destructive action; may require approval. API summary: removeUserOrgs Orgs.
delete_user_firebaseDeletesPermanently delete a firebase by firebase uuid. Destructive action; may require approval. API summary: unregisterDevice UsersSighV1.
delete_user_properties_remove_user_propertiesDeletesPermanently delete a user by user id. Destructive action; may require approval. API summary: removeUserProperties Properties.
delete_user_user_deleteDeletesPermanently delete a user by user id. Destructive action; may require approval. API summary: delete User.
delete_user_user_notification_settings_delete_notifications_settDeletesPermanently delete a user by user id. Destructive action; may require approval. API summary: deleteNotificationsSettings userNotificationSettings.
delete_user_user_notification_settings_delete_user_phoneDeletesPermanently delete a user by phone. Destructive action; may require approval. API summary: deleteUserPhone userNotificationSettings.
delete_user_user_notification_settings_remove_user_deviceDeletesPermanently delete a user by user uuid. Destructive action; may require approval. API summary: removeUserDevice userNotificationSettings.
delete_user_users_sigh_v1_delete_userDeletesPermanently delete a user by user key. Destructive action; may require approval. API summary: deleteUser UsersSighV1.
delete_webhookDeletesPermanently delete a webhook by webhook id. Destructive action; may require approval. API summary: deleteWebhook Orgs.
get_activate_statusGet the current status of a activate by mac. API summary: getActivationStatus PropertiesSighV1.
get_billingsubscriptionsGet one company by company id. API summary: get BillingSubscriptions.
get_bundleGet one bundle by bundle id. API summary: get BillingBundles.
get_companyGet one company by company id. API summary: get BillingOrganization.
get_company_organization_sigh_v1_get_organizationsGet one company by company key. API summary: getOrganizations OrganizationSighV1.
get_current_userGet the signed-in NoiseAware user's own profile.
get_firmwareGet one firmware by version. API summary: getRecentFirmwarePath MiscSighV1.
get_icallinkGet one icallink by icallink key. API summary: getPropertyICallLinks ReservationsSighV1.
get_icallink_reservations_sigh_v1_get_property_i_call_linkGet one icallink by link key. API summary: getPropertyICallLink ReservationsSighV1.
get_messageGet one message by email. API summary: getByEmail User.
get_message_user_notification_settings_get_user_emailsGet one message by message id. API summary: getUserEmails userNotificationSettings.
get_orgGet one org by org id. API summary: get Orgs.
get_org_idGet one org id by org id id. API summary: getOrgId BillingOrganization.
get_partnerGet one partner by partner id. API summary: get Partner.
get_propertyGet one property by `property_key`, including address, occupancy, reservation status and device counts.
get_property_2Get one property by property id. API summary: get Properties.
get_property_noise_dataGet noise-level readings over time for a property by `property_key`, optionally up to `end` or around an `event_id`.
get_property_properties_get_graph_dataGet one property by end. API summary: getGraphData Properties.
get_property_user_notification_settings_get_property_notificatioGet one property by property id. API summary: getPropertyNotificationsSettings userNotificationSettings.
get_property_zoneGet one sensor zone by `property_key` and `zone_key`, including its current noise threshold and status.
get_reservationGet one reservation by its ID (`message_id`), including guest details and dates.
get_sampletimeGet one sampletime by end. API summary: getTelemetryData MiscSighV1.
get_userGet one user by user id. API summary: get User.
get_user_user_notification_settings_get_notifications_allGet one user by user id. API summary: getNotificationsAll userNotificationSettings.
get_user_user_notification_settings_get_notifications_settingsGet one user by user id. API summary: getNotificationsSettings userNotificationSettings.
get_user_user_notification_settings_get_user_deviceGet one user by user id. API summary: getUserDevice userNotificationSettings.
get_user_user_notification_settings_get_user_phonesGet one user by user id. API summary: getUserPhones userNotificationSettings.
get_validate_reset_linkGet one validate reset link by link. API summary: validateResetLink Authentication.
list_billingbundlesChanges dataCreate a new user. API summary: list BillingBundles.
list_billingorganizationChanges dataCreate a new user. API summary: list BillingOrganization.
list_billingsubscriptionsChanges dataCreate a new user. API summary: list BillingSubscriptions.
list_company_usersList users for a company. API summary: getUsersForOrganization OrganizationSighV1.
list_deviceChanges dataCreate a new user. API summary: list Device.
list_eventsChanges dataCreate a new user. API summary: list Events.
list_guest_messagesList guest messages, optionally for one `property_key` or `reservation_id`. Paginated.
list_integration_keysList keys for a integration. API summary: getAutoGeneratedKey IntegrationSighV1.
list_integration_propertiesList properties for a integration. Results are paginated. API summary: getPaginatedProperties IntegrationSighV1.
list_integration_unimportedpropertiesList unimportedproperties for a integration. Results are paginated. API summary: getPaginatedUnimportedProperties IntegrationSighV1.
list_integrationsList integrations. API summary: getIntegrationsForPermittedUser IntegrationSighV1.
list_logsChanges dataCreate a new user. API summary: list Logs.
list_macChanges dataCreate a new user. API summary: list Mac.
list_noise_eventsList noise events, optionally filtered by `property_key`, `zone_key`, event `type` or `before` a time. Paginated with `cursor`.
list_org_panelsList panels for a org. API summary: getPanels Orgs.
list_org_weeklyreportsList weeklyreports for a org. API summary: weeklyReport Orgs.
list_orgsChanges dataCreate a new user. API summary: list Orgs.
list_propertiesList your rental properties, optionally matching `search` text. Returns property keys for other tools.
list_properties_2List properties for a property. API summary: getPanels Properties.
list_property_activityzonesList activityzones for a property. API summary: getActivityZones Properties.
list_property_notesList notes saved on your properties.
list_property_wifisList wifis for a property. API summary: getWifiCredentials PropertiesSighV1.
list_property_zonesList the sensor zones (rooms/areas with a sensor) at a property by `property_key`, with status and battery.
list_recent_alertsList recent noise alerts from the last `duration` minutes (default 60).
list_reservationsList reservations active at `time`, or within `filter_start`/`filter_end`, optionally by `property_key`, status `type` (Booked, Vacant, Hold) or `platform` (e.g. Airbnb).
list_resetsList resets. API summary: getUniqueResetKey UsersSighV1.
list_shipstationsList shipstations. Optional filters: action, end date or start date. API summary: exportOrders Shipstation.
list_thresholdsChanges dataCreate a new user. API summary: list Thresholds.
list_unread_guest_messagesList guest messages that have not been read yet.
list_userChanges dataCreate a new user. API summary: list User.
list_usersList users. API summary: getSelf User.
list_users_integration_sigh_v1_get_integrations_for_permitted_usList users. API summary: getIntegrationsForPermittedUserList IntegrationSighV1.
list_users_user_get_permissionsList users. API summary: getPermissions User.
list_users_users_sigh_v1_get_properties_list_for_permitted_userList users. API summary: getPropertiesListForPermittedUser UsersSighV1.
list_zone_thresholdsList the noise threshold schedule for one zone by `zone_key`.
mark_guest_message_readDeletesMark one guest message as read by `message_id`.
search_outdoorsSearch outdoors. Use this to find existing outdoors before creating a new outdoor. API summary: getOutdoorSensors PropertiesSighV1.
search_zonesSearch sensor zones across all properties by `search` text. Paginated.
send_guest_messageVisible to othersSend a message to the guest of a reservation: `message_id` is the reservation ID and `body` is the text. The guest receives it.
set_zone_thresholdsChanges dataSet the noise threshold schedule for a zone (`zone_key`): `items` is a list of time windows with `start`, `end` and `threshold` level. This changes when noise alerts fire.
submit_icallinkVisible to othersValidate a icallink. Has effects visible outside this system. API summary: validateIcall ReservationsSighV1.
submit_order_totalVisible to othersCalculate a order. Has effects visible outside this system. API summary: calculateTotal orders.
submit_payment_totalVisible to othersCalculate a payment. Has effects visible outside this system. API summary: calculateTotal BillingPayments.
submit_userVisible to othersCount a user. Has effects visible outside this system. API summary: listCount Orgs.
submit_user_countVisible to othersCount a user. Has effects visible outside this system. API summary: listOrgPartnersCount Partner.
submit_user_properties_list_countVisible to othersCount a user. Has effects visible outside this system. API summary: listCount Properties.
submit_user_user_list_countVisible to othersCount a user. Has effects visible outside this system. API summary: listCount User.
update_activity_zone_replacesVisible to othersUpdate an existing replace identified by activity zone id. Has effects visible outside this system. API summary: replace Thresholds.
update_bundleChanges dataUpdate an existing bundle identified by bundle id. API summary: update BillingBundles.
update_companyChanges dataUpdate an existing company identified by company id. API summary: update BillingOrganization.
update_forgot_passwordDeletesUpdate an existing forgot password identified by email. Destructive action; may require approval. API summary: forgotPassword Authentication.
update_icallinksVisible to othersUpdate an existing icallink. Has effects visible outside this system. API summary: UpdatePropertyICallLink ReservationsSighV1.
update_impersonateDeletesUpdate an existing impersonate identified by impersonate id. Destructive action; may require approval. API summary: impersonate Authentication.
update_integrationsVisible to othersUpdate an existing integration. Has effects visible outside this system. API summary: updateIntegration IntegrationSighV1.
update_orgChanges dataUpdate an existing org identified by org id. API summary: update Orgs.
update_passwordDeletesUpdate an existing password identified by reset key. Destructive action; may require approval. API summary: setPassword UsersSighV1.
update_propertyChanges dataUpdate an existing property identified by property id. API summary: update Properties.
update_property_replacesVisible to othersUpdate an existing replace identified by property id. Has effects visible outside this system. API summary: replaceForProperty Thresholds.
update_property_user_notification_settings_create_property_notifChanges dataUpdate an existing property identified by property id. API summary: createPropertyNotificationsSettings userNotificationSettings.
update_property_wifisVisible to othersUpdate an existing wifi identified by property key. Has effects visible outside this system. API summary: updateWifiCredentials PropertiesSighV1.
update_property_zoneChanges dataUpdate an existing zone identified by zone key. API summary: updateAZ AZSighV1.
update_send_verificationVisible to othersUpdate an existing send verification identified by send verification id. Has effects visible outside this system. API summary: sendPhoneVerification Authentication.
update_set_passwordDeletesUpdate an existing set password identified by link. Destructive action; may require approval. API summary: setPassword Authentication.
update_userChanges dataUpdate an existing user identified by user id. API summary: addUserProperties Properties.
update_user_user_notification_settings_add_user_deviceChanges dataUpdate an existing user identified by user id. API summary: addUserDevice userNotificationSettings.
update_user_user_notification_settings_update_notifications_settChanges dataUpdate an existing user identified by user id. API summary: updateNotificationsSettings userNotificationSettings.
update_user_user_update_user_org_roleDeletesUpdate an existing user identified by user id. Destructive action; may require approval. API summary: updateUserOrgRole User.
update_verify_phoneChanges dataUpdate an existing verify phone identified by verify phone id. API summary: verifyPhone Authentication.

Set up in three steps

1
Pick the app
Create a free HeyMyApps account and choose NoiseAware from the app list.
2
Paste your key
Enter the email and password of a NoiseAware user. NoiseAware recommends an admin user, since other roles cannot reach most data. An active NoiseAware subscription is required.
3
Add the link to your AI
You get a personal MCP link. Add it to Claude, ChatGPT or Cursor:
1. Click your name, then Settings › Connectors › Add custom connector.
2. Paste your link as the Remote MCP server URL.
3. Switch it on from the + menu in a chat.

Questions

What can the AI do in NoiseAware?

The AI can read your profile, properties, sensor zones, threshold schedules, noise events, recent alerts, noise readings, reservations, guest messages and property notes. It can set threshold schedules, add and delete reservations, send guest messages, mark messages as read and add property notes.

Does the AI see my NoiseAware credentials?

No. Your NoiseAware email and password are encrypted at rest and never shown to the AI. After you save them, they are not shown again, not even to you. The AI only sees the results of the tools it calls.

Can I control what the AI is allowed to do?

Yes. You choose which tools are switched on, so you can start with alerts and events only. Sending a guest message reaches your guest, deleting a reservation cannot be undone, and changing thresholds changes when alerts fire. These can require your approval before they run. Every tool call is logged.

Does it work with ChatGPT?

Yes. In ChatGPT go to Settings › Apps & Connectors › Advanced and turn on Developer mode, then add your HeyMyApps link. Developer mode needs a paid ChatGPT plan: Plus, Pro, Business or Enterprise. The same link also works in Claude (Settings › Connectors › Add custom connector), Cursor and other MCP clients.

What does it cost?

HeyMyApps has a free plan with no credit card required. Paid plans bill per completed task. You also need your own NoiseAware account with an active subscription.

Why does NoiseAware need an email and password?

NoiseAware's API signs in with a user's email and password and then issues a short-lived token. HeyMyApps stores your login encrypted and gets a new token when needed. Use an admin user, because NoiseAware limits most data to admins.